How to Layout a Line Using a Leica Builder Total Station

Using Leica Builder 405: Interface and Line Layout

Interface Overview: Leica Builder 405

Screen Layout

The display on the Leica Builder 405 is the primary interface for interacting with the total station. It dynamically updates to show menus and real-time data based on the selected operation.

Keypad Layout

• Numeric Keypad: Located centrally for entering numerical data, coordinates, and parameters.
• Cursor Buttons: Positioned at the top for navigating menus and settings.
• Page Button: Used to toggle between main menu pages like Config, Theo, Prog, and Data.
• Escape Button: Found at the bottom, this exits or cancels the current operation.
• Function Keys (F1 to F3):
  • F1: Selects the left-most option displayed on the screen.
  • F2: Selects the middle option.
  • F3: Selects the right-most option.

Method for Layout of a Line Using the Reference Line

The Leica Builder 405 provides a precise method for performing line layouts based on a reference line. Follow these steps:

1. Access the Prog Page:
   • Use the Page Button to navigate to the Prog menu.
   • From here, access key operations like Setup (F3) for resections, Measure (F2) for standard measurements, and App (F1) for advanced applications.
2. Open the App Menu:
   • Select F1 (App) to open advanced functionalities.
   • Choose options like Layout, As Built, Ang & Distance, or Area & Volume.
3. Expand Options:
   • Select More to access additional tools like Parallel Line, Hidden Point, COGO, and Layout Line, Arc, Spiral.
4. Layout a Line:
   1. Enter the first point and second (or last) point of the reference line.
   2. Confirm by pressing OK.
   3. The machine provides directional guidance:
      • Right: Move right relative to the reference line.
      • Left: Move left relative to the reference line.
   4. If the points are reversed, the navigation directions will also reverse.
   5. For a fixed length and offset, click Layout and enter the required values.
   6. To verify measurements, use the Check option.
5. Final Validation: Use the navigation and measurement feedback to ensure accurate alignment with the reference line.

In this video, i have explained the resection method in Urdu Hindi language of Lieca builder total station 

© 2024 Muhammad ibrahim. All rights reserved. Detailed guide on Leica Builder 405 interface and functionality.